Inova High Performance CPU board ICP-PII Manual de usuario descargar pdf (Pagina 23)

ICP-PIII

Product Overview

CompactPCI

Figure 1.44 Front-Panel Options

The front-panels shown in Figure 1.44 show the tremendous flexibility built into Inova’s CPU

concept. From left, the standard CPU is 4TE with Ethernet, FireWire, USB and VGA graphic con-

nections. If, instead of VGA graphics, PanelLink is required then the piggyback is installed on J14

for this purpose. TFT graphics are realised in a similar way except an extra 4TE front-panel is

required (not shown) to carry the flat-band ribbon cables.

If the application requires the mouse, keyboard and COM ports or if the CPU is equipped with a

hard disk or FLASH that is greater than 144MByte

then an 8TE front-panel is selected. Both COM

ports are installed on Inova’s HD or IDE FLASH carrier board. A piggyback with COM1, mouse and

keyboard is also available allowing the lower 9-pin D-Sub connector position to be used for a PCI-

based piggyback.

LPT and COM2 interfaces are available on a dedicated panel shown to the right of Figure 1.44.

If a high-profile DOC FLASH is installed and a hard disk is required, the HD is mounted separately

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 93 94

Sin comentarios

Inova High Performance CPU board ICP-PII Manual de usuario Pagina 23